Our printed MPE product range consists of various colour options, therefore architectural glass manufacturers won’t have a hard time creating a coloured glass architectural design. The printed inserts can be implemented in a variety of applications in interior and exterior. Think of designs for kitchen and bathroom, onyx designs, solar panels, partition walls and monuments (statues, headstones and gravestones) Moreover, the product can be used in pretty much any building construction such as private homes, hotels, hospitals, airports, schools, restaurants, and offices. MPE print is especially suitable for exterior applications. SGG has several lightfastness test reports (= total light spectrum, not only UV) at disposal, where MPE is tested with various interlayers. If you have an exterior project, we are happy to share the test results.
The effects which can be created with MPE are:
‍
Photographs in glass;
Vector generated designs;
Solid colours to exactly match the interior or exterior;
Gradients colours to exactly match the interior or exterior.

The new MPE product combines the printing technology with the PriWatt® PDLC-technology on switchable glass. As result, the image is visible on both sides in the same intensity in both opaque and transparent state of the PDLC.
To create more depth in the coloured glass architecture, a 3D-effect can also be created. As the MPE inserts are transparent applying an opaque or reflective layer on side 4 (back side) of the laminate and a 3D-effect is created.